• Single bottle with etching, prime & bond provide clinically acceptable bond strength
• The primer contains the revolutionary 10-MDP
• (10-MDP) a functional monomer that helps in bonding to dentin, cut, and un-cut enamel.
• MDP promotes physical and chemical adhesion
• No post-operative sensitivity
• High bond strength and durability.

Prevest Denpro Fusion Crysta Adhesive Primer – Regular Pack (10021)

Fusion Crysta Adhesive Primer is a light-cured single-component orthodontic primer that combines etching, priming, and bonding in one bottle. It is an ethanol water-based dental adhesive containing 10-Methacryloyloxydececyl Dihydrogen Phosphate (10-MDP) a functional monomer that helps in bonding to dentin and enamel.

Indications

• Fusion Crysta Adhesive Primer is indicated for use as a combined etchant and primer in orthodontic treatment and is used only with light-curing direct bonding orthodontic adhesive (FUSION CRYSTA ADHESIVE).

Composition:

• BisGMA
• Triethylene Glycol Dimethacrylate
• Camphorquinone
• Dimethyl
• Amino Ethyl Methacrylate
• Ethyl 4-dimethyl Amino Benzoate
• 10-Methacryloyloxydececyl
• Dihydrogen Phosphate
• Butylated Hydroxytoluene

• 1 x 5ml Bottle
• 5 x Mixing Wells
• 10 x Micro Brushes
• 1 x Instruction Manual

SELF-ETCHING TECHNIQUE :

• Wash thoroughly with water spray. Use an absorbent pellet or high volume evacuation (HVE) for 1-2 seconds, to remove excess water (do not desiccate).
• Dispense 1-2 drops of Fusion Crysta Adhesive Primer into a clean well. Replace the cap
  onto the bottle promptly to avoid evaporation of the solvent.
• Apply two separate coats of Fusion Crysta Adhesive Primer, scrubbing the preparation with a micro brush for 10-15 seconds per coat.
• Air-drying using an air syringe for at least 10 seconds till there should be no visible
  movement of the adhesive. The surface should have a uniform glossy appearance;
  otherwise, apply an additional coat of FUSION CRYSTA ADHESIVE PRIMER and repeat
  Steps 2 and 3.
• Light cure for 20 seconds.
• Continue with the placement of the orthodontic adhesive (FUSION CRYSTA ADHESIVE)
  restorative material according to the manufacturer’s instructions.