The new Phrozen Aqua Resin Grey 4K is specially designed to print high-resolution 3D models and works best with the new Sonic Mini 4K 3D printer. The formula was created so that every designer can print the exact replica of their designs, with the added benefit of having little shrinkage and low odour.

Low shrinkage and high precision

Phrozen Aqua is designed for low shrinkage and high precision printing. The low warping and good dimensional stability are particularly suitable for precise parts.

Low viscosity and odour

Phrozen Aqua is easy to print and post-process due to its low viscosity. In addition, your workplace is not unpleasant due to its low odour.

Fast and accurate printing

Phrozen Aqua 4K has been adapted to the requirements of the new Sonic Mini 4K. Curing time per layer: 7 seconds for the Shuffle and 1.5 seconds for the Phrozen Sonic series.

Broad application

Printed parts have good hardness and some toughness. It not only fits perfectly for models, but also for product prototyping.

NOTE

• Way to Rinse: Clean with alcohol spray with air gun. DO NOT immerse model into alcohol for long time.
• Use and preserve resins in room temperature, and in dark and ventilated conditions
• Shake well before each use
• After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
• Keep resin away from kids and away from direct sunlight exposure
• Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
• DO NOT dump resin. Please cure it and treat it as general plastic garbage.
• After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year.

PARAMETER

• Density: 1.1 g / cm3
• Viscosity: 150 cps
• Tensile Strength (Break): 24Mpa
• Elongation: 7 %
• I-ZOD Impact Strength: 6.78 KJ/m2
• Surface Hardness, Shore D: 77 Shore D
• Water Contact Angle: 35 degree
• PACKAGING
• 1X PHROZEN GREY RESIN 1KG BTL