• 3M ESPE Retraction Capsule delivers a retraction paste that contains 15% aluminum chloride. The astringent retraction paste is placed directly into the sulcus via a patented, easy-to-use, hygienic unit-dose capsule. The capsules are compatible with most composite dispensers.

  INDICATIONS:

  3M™ Retraction Capsule is indicated for the temporary tissue retraction of the marginal gingiva to provide a dry sulcus when the periodontium is healthy, such as:

• Taking impressions (material-based or digital)
• Preparation of temporary casts
• Preparation of Class II and V fillings
• Retracts tissue gently
• A great impression—even a digital impression—starts with controlling tissue and moisture. Our capsule’s extra-fine tip delivers hemostatic paste right into the sulcus to gently retract tissue and control bleeding.
• Save time
• Unlike gingival retraction cords that can be difficult and time-consuming to place, the 3M retraction capsule is a fast, convenient and effective solution for gingival retraction. With its extra-fine tip, the 3M retraction capsule delivers a 15% aluminum chloride astringent paste right into the sulcus, pushing the gingival tissue away from the tooth and allowing you to capture a detailed impression of the preparation margin.
• Features
• Viscosity:Heavy Body
• The extra fine tip fits directly into the sulcus.
• Enables a clean, dry sulcus and robust hemostasis.
• Hygienic unit-dose capsule.
• Versus dental retraction cords:
• Convenient and time-saving retraction process: Up to 50% faster.
• Lower risk of hemorrhage.
• Gentle on tissue for improved patient comfort.
• Versus competing pastes:
• Easy access into the sulcus.
• Better interproximal access due to capsule’s extra-fine tip.
• Compatible with most composite dispensers.
• Key Specifications

  PRECAUTIONS:

  The product must not be used in patients suffering from a diseased periodontium, open furcations or exposed bone.

  FREQUENTLY ASKED QUESTIONS:

  For how long can the paste be left in the sulcus?

• Typically, the paste should be left in the sulcus for a minimum of 2 minutes to achieve good retraction results. If a hemostatic device is applied too long it may exert unwanted negative effects on the tissue health. Therefore, the hemostatic retraction paste must be rinsed off completely.
• How long can one store the capsule outside of the blister?
• The capsule must be taken out of the blister immediately prior to application. It should not be stored outside the blister.
• How many teeth can be treated with one capsule?
• The content of one unit-dose capsule is sufficient to treat up to 3 teeth. The capsules are for single use and must not be used on more than one patient.
• What is the orientation ring for?
• The orientation ring corresponds in size and position to the perio probe. It is a feature for more precise and easy intraoral handling.
• Why is there a lower risk of bleeding/post-hemorrhage than with cords?
• Cords consist of small fibers that may be incorporated in the coagulum. When the cord is removed, the wound might be opened again. The paste is washed off by air-water spray and suction, resulting in a clean and dry sulcus area.
• How can one judge if the retraction effect is sufficient?
• The preparation margin should be clearly visible in the impression. The amount of excessive impression material (“flash”) that covers sulcular areas below the preparation margin is not important.
• Does the 3M™ ESPE™ Retraction Capsule influence the setting of impression materials?
• As with all astringents, the 3M ESPE astringent retraction paste may inhibit the setting of A-silicones (VPS) and Polyethers. The paste must be completely rinsed off with air-water spray and suction prior to impression taking.
• Packaging
• 25 x 7.5g Capsules
• Direction to Use

  INSTRUCTIONS TO USE:

  1) Remove a retraction capsule from the blister and insert into dispenser (fits into most composite dispensers). Extrude a small amount of paste and discard.

  2) Insert retraction capsule tip into the sulcus.

  3) Slowly and steadily, inject astringent retraction paste into sulcus. Completely fill the sulcus.

  4) OPTIONAL: PROCEDURE WITH CORDS. For more gingival deflection, the astringent retraction paste can be used in combination with retraction cords.

  5) Leave astringent retraction paste on for a minimum of 2 minutes.

  6) Completely remove astringent retraction paste with air-water spray and suction.

PACKING

• 25 x 7.5g Capsules

PRODUCT SPECIFICATIONS